DOUBLE CONE BLENDER

“Swiss” Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts are made of stainless steel. The effective volume for optimum homogeneity is between 35-70% of gross volume. The SLANT double cone design eliminates dead sports, which occasionally occur in conventional double cone mixer. It can be used for pharmaceutical, food, chemical and cosmetic products etc.

SALIENT FEATURES

All Contact Parts are in AISI SS 316 / AISI SS 316L and Non-Contact Parts are in AISI SS 304.
The conical shape at both ends enables uniform mixing and easy discharge.
All contact parts are made out of SS 316 quality material.
Two nos. of safety road will be provided at back side. ( One LH side & one RH side )
Suitable size of butterfly valve at one end of the cone provided for material discharge & hole with open able cover provided at other end of the cone for material charging & cleaning.
One shaft with 04 nos. of fixed baffles with mirror polished provided inside the cone.
Cone will be mirror polished from the inside & outside & structure will be matt polished.
All moving parts covered with SS304 covers.
Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
As per customer requirement machine will be provided with left side drive or with right side drive.
Worm reduction gear use for speed reduction.
Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
General structure made out of SS304 and Polished to the matt / mirror finish (as required by you) in GMP Model.
Hand wheel will be provided for manual tilting of cone.
Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.
FLP MOTOR (Optional).